Heison SA presently offers a wide range of wood panel products such as birch and softwood plywood, film-faced plywood etc. Birch plywood is produced from the best grades of timber with the use of the most advanced technologies and equipment. Besides regular birch plywood, we can offer exterior plywood which can sustain prolonged exposure to moist environment. All products are certificated and carry BFU 100 mark in accordance with DIN 68 705 part 3. We also can meet your special demands.
 

Thickness: 3.0, 4.0, 5.0, 6.0, 6.5, 8.0, 9.0, 10.0, 12.0, 15.0, 18.0, 21.0, 24.0, 27.0, 28.0, 30.0 mm
Tolerance on length (width) of the plywood sheets: ± 2 mm
Waterproof - WBP mark
Sanded two sides - S2
Formaldehyde emission class - E1 (up to
    10 mg per 100g of absolutely dry plywood)

Grade of face veneer: B, BB, CP, C
    (according to the technical conditions)
Humidity: 5-10 %
Ultimate shearing strength after one hour in
    boiling water: not less 1.5 MPa
 

Thickness: 6.5, 8.0, 9.0, 9.5, 12.0, 12.5, 15.0, 18.0, 19.0, 21.0, 22.0, 24.0 mm
Tolerance on length (width) of the plywood sheets: ± 2 mm
Waterproof - WBP mark
Sanded two sides - S2
Formaldehyde emission class - E1 (up to
    10 mg per 100g of absolutely dry plywood)

Grade of face veneer: BX elite, BX, CX+, CX
    (according to the technical conditions)
Humidity: 5-10 %
Ultimate shearing strength after one hour in
    boiling water: not less 1.0 MPa
 

Thickness: 8.0, 9.0, 12.0, 15.0, 18.0, 21.0 mm
Tolerance on length (width) of the plywood sheets: ± 2 mm
Waterproof - WBP mark
Sanded two sides - S2
Formaldehyde emission class - E1 (up to
    10 mg per 100g of absolutely dry plywood)

TWIN - one birch veneer on each side and softwood inner plies
COMBI - one birch veneer on each side and alternate inner veneers of softwood and birch
COMBI TWIN - two birch veneers on each side and alternate inner veneers of softwood and birch

Grade of face veneer: B, BB, CP, C
    (according to the technical conditions)
Humidity: 5-10 %
Ultimate shearing strength after one hour in
    boiling water: not less 1.0 MPa
 

Thickness: 6.5, 8.0, 9.0, 12.0, 15.0, 18.0, 20.0, 21.0, 24.0, 27.0, 30.0 mm
Tolerance on length (width) of the plywood sheets: ± 2 mm
Waterproof - WBP mark
Smooth or imprinted surface
Formaldehyde emission class - E1 (up to
    10 mg per 100g of absolutely dry plywood)

Grade of face veneer: 1, 2, 1/2
    (according to the technical conditions)
Humidity: max 10 %
Ultimate shearing strength after one hour in
    boiling water, min: 1.5 MPa
Ultimate creasing strength, min: 70 Mpa.
Ultimate tensile strength, not less: 40 Mpa.