Heison SA pakub suures valikus vineeri- ja puitpaneele tooteid.
|
| BIRCH PLYWOOD
|
 Grade: B
 Grade: BB
 Grade: CP
 Grade: C
|
Sizes: 1525x1525, 2440x1220, 2500x1250 mm
Thickness: 3.0, 4.0, 5.0, 6.0, 6.5, 8.0, 9.0, 10.0, 12.0, 15.0, 18.0,
21.0, 24.0, 27.0, 28.0, 30.0 mm
Tolerance on length (width) of the plywood sheets: ± 2 mm
 Waterproof - WBP mark
Sanded two sides - S2
Formaldehyde emission class - E1 (up to
10 mg per 100g of absolutely dry plywood)
 Grade of face veneer: B, BB, CP, C
(according to the technical conditions)
Humidity: 5-10 %
Ultimate shearing strength after one hour in
boiling water: not less 1.5 MPa
|
| CONIFEROUS (PINE) PLYWOOD |
 Grade: BX+
 Grade: BX
 Grade: CX
|
Sizes: 2440x1220, 1220x2440 mm
Thickness: 6.5, 8.0, 9.0, 9.5, 12.0, 12.5, 15.0, 18.0, 19.0, 21.0, 22.0, 24.0 mm
Tolerance on length (width) of the plywood sheets: ± 2 mm
Waterproof - WBP mark
Sanded two sides - S2
Formaldehyde emission class - E1 (up to
10 mg per 100g of absolutely dry plywood)
Grade of face veneer: BX elite, BX, CX+, CX
(according to the technical conditions)
Humidity: 5-10 %
Ultimate shearing strength after one hour in
boiling water: not less 1.0 MPa
|
| TWIN, COMBI, COMBI TWIN PLYWOOD |
Grade: B
Grade: BB
Grade: CP
Grade: C
|
Sizes: 2440x1220, 2500x1250 mm
Thickness: 8.0, 9.0, 12.0, 15.0, 18.0, 21.0 mm
Tolerance on length (width) of the plywood sheets: ± 2 mm
Waterproof - WBP mark
Sanded two sides - S2
Formaldehyde emission class - E1 (up to
10 mg per 100g of absolutely dry plywood)
TWIN - one birch veneer on each side and softwood inner plies
COMBI - one birch veneer on each side and alternate inner veneers of softwood and birch
COMBI TWIN - two birch veneers on each side and alternate inner veneers of softwood and birch
Grade of face veneer: B, BB, CP, C
(according to the technical conditions)
Humidity: 5-10 %
Ultimate shearing strength after one hour in
boiling water: not less 1.0 MPa
|
| FILM-FACED PLYWOOD |
 |
Sizes: 2440x1220, 2500x1250 mm
Thickness: 6.5, 8.0, 9.0, 12.0, 15.0, 18.0, 20.0, 21.0, 24.0, 27.0, 30.0 mm
Tolerance on length (width) of the plywood sheets: ± 2 mm
Waterproof - WBP mark
Smooth or imprinted surface
Formaldehyde emission class - E1 (up to
10 mg per 100g of absolutely dry plywood)
Grade of face veneer: 1, 2, 1/2
(according to the technical conditions)
Humidity: max 10 %
Ultimate shearing strength after one hour in
boiling water, min: 1.5 MPa
Ultimate creasing strength, min: 70 Mpa.
Ultimate tensile strength, not less: 40 Mpa.
|
| PLYWOOD APPLICATIONS: |
|
|
|
